MenuView Cart

F-86 Sabre by Larry McManus

F-86 Sabre by Larry McManus
F-86 Sabre by Larry McManus
F-86 Sabre by Larry McManus
F-86 Sabre by Larry McManus
F-86 Sabre by Larry McManus
Click To Enlarge
These four foot wide "High Definition" prints were created to be reproduced at this width. This is the reason for the excellent detail, sharpness and color saturation that you'll see in every print. T...  >Read More
$295.00
Select from: 
Qty:
High-Definition Mural-Sized Prints
For more artwork by Larry McManus, click here

Choose from:

  • Paper Edition....$295
  • Canvas Edition....$495

  • Overall Size: 48" x 24" (Includes a white border)
  • Image Size: 44" x 20"

  • Your choice of gloss paper, semi-gloss paper, or canvas!
  • Includes the artist's printed signature on the image.
  • These four foot wide "High Definition" prints were created to be reproduced at this width. This is the reason for the excellent detail, sharpness and color saturation that you'll see in every print. These are the most detailed aviation prints at this size you can find!

    About the print:

    The North American F-86 Sabre, sometimes called the Sabrejet, was a transonic jet fighter aircraft. Produced by North American Aviation, the Sabre is best known as the United States' first swept wing fighter which could counter the similarly-winged Soviet MiG-15 in high-speed dogfights over the skies of the Korean War (1950-53). Considered one of the best and most important fighter aircraft in that war, the F-86 is also rated highly in comparison with fighters of other eras. Although it was developed in the late 1940s and was outdated by the end of the '50s, the Sabre proved versatile and adaptable, and continued as a front-line fighter in numerous air forces until the last active operational examples were retired by the Bolivian Air Force in 1994. Its success led to an extended production run of more than 7,800 aircraft between 1949 and 1956, in the U.S., Japan and Italy. Variants were built in Canada and Australia. The Canadair Sabre added another 1,815 airframes, and the significantly redesigned CAC Sabre (sometimes known as the Avon Sabre or CAC CA-27), had a production run of 112. The Sabre was by far the most-produced Western jet fighter, with total production of all variants at 9,860 units.


    HOW THEY'RE CREATED - IN THE ARTIST'S WORDS:

    A great deal of planning and passion goes into each large format image...

    The Concept...

    First I sketch out what I want the nal image to look like and then create a shot list for the various parts of the image. Locations need to be identi ed for the background and aircraft shots and models need to be hired. Only then am I ready to shoot the various parts of the image.

    The Plane...

    By shooting the plane by itself on the ground in a controlled situation, I can get much better detail and dynamic range in the image than shooting in the air. The plane is set up at the right angle with the shadow in the right direction. The pilot is positioned and looking in the right direction and the plane is trimmed out with the control surfaces in the correct positions. Multiple shots are taken at various exposures and different angles can be easily achieved during the photo session.

    The Background...

    This is where you have to wait for nature to behave. The air to ground or cloud formation shots have to be taken at the right time of day with the shadows in the correct position. When you are just shooting the background from the air and not worrying about exposing a plane correctly, you are able to create more dynamic views and color saturation that meld together and make the aircraft pop out of the image.

    The Creation...

    There are no short cuts in creating the nal large format photo illustration. You start by editing fty or so shots down to the ten that will be used in the nal master image. This is where my background as a designer/artist comes in. The nal 2 GB master image can take forty hours or more of painstakingly detailed work to combine all the photos, re-illustrate parts of the scene and to color balance the nal image to achieve the original vision.


    HOW THEY'RE PRINTED:
    (HINT: LARRY'S FOUR FOOT WIDE (HD) MURAL PRINTS ARE NOT PRINTED USING ANY INKS!)


    To reproduce the fantastic detail and saturated color, these aviation images are printed using actual red, green and blue lasers that can produce 68 billion colors. The lasers project the image on actual photographic material and then is processed through chemical baths. This gives you a TRUE HIGH DEFFINITON (HD) CONTINUOUS TONE IMAGE with no dots like you see in offset lithography printing. This printing method is far superior in detail and color depth than any other reproduction method.

    WE OFFERS THESE PRINTS ON TWO TYPES OF (HD) ARCHIVAL MATERIAL... OR CANVAS:

    1) A very high gloss for the best detail and color saturation
    2) A semi-gloss for a very sharp and more muted feeling
    3) On canvas

    The canvas prints are printed with archival quality inks onto a unique impregnated glossy canvas media. This allows for the highest color saturation and detail you can achieve in a canvas print. The Giclée printing process provides better color accuracy than other means of reproduction on canvas. The quality of the Giclée print rivals traditional silver-halide and gelatin printing processes and is commonly found in museums, art galleries, and photographic galleries.
    Shop by Artist
    Shop by Aircraft